thanks for the info ill give it a try

used DCC for a year or so on a self installed Spectrum Russian Decapod with speaker install;

i was really proud it worked great!!! until I let my son (3) and nephew (4) alone for 30 seconds last Christmas with my layout;

nothing was off track etc, but i estimate that the little guys decided to press some buttons randomly on the EZ command.
now - it just doesn't run. I want to just reset all CV's to factory default on the ....the soundtraxx dsd- lc  manual states " program cv 30 to 2" to reset cv's to factory default.....what do i do? I have never programmed a CV and the EZ command manual doesn't give me any information

did the install of the decoder all went well but strangley enough the front and rear (yelow and white wires were mixed up) front was yellow rear was white ...switch them around all works fine???

very difficult getting the decoder into the tender with the speaker sealed well, but got it...the thing is very loud with the speaker I put in....learned alot and am ready to do it again now

thanx much

jim

thanx ,  gonna do it this weekend...let ya know how it goes...
jim

 


THANX GUYS,   I would imagine that the heavy mtn 4-8-2  is basicallly the same gig as this 2-10-0:

Q: to the original post?  did you remove the PCB or just plug and play into the 8 pin socket?

If you used the socket did you have any info on the 1-8 pin number connections, (i.e. what . where they connect to via the wiring)....I think I can trace them to the actual wires , via the PCB, but would like to be sure if I could....

thanx for any direction on this issue...first install doe DCC w/ sound

CAN ANYONE HELP WITH DATA ON A STEP BY STEP DECODER INSTALL IN A 2-10-0 DECAPOD STEAM SPECTRUM? NEW TO DCC AND WANT TO INSTALLL A DECODER THAT IS BY SOUNDTRAXX FOR "MEDIUM STEAM"  DSD 090 LC... DON'T WANT TO SCRW IT UP AND BURN THIS THING UP???

ANY HELP??

JIM