Thanks! .. will try that =)

dennis=)

Thank you Joe/ABC.

Does it have some sort of a lock?  I did put the stud into one of the holes, but it keeps on falling off.

dennis=)

Hi,

I just got my first HO DCC train.  I did the assembly and it runs just fine (with sound and all).  My problem is, the loco is connected to the tender by just the wires (of speakers?).  I can see a strip of metal with two holes from the loco, and something like a stud on the tender.  What is the right way of connecting the two together?

dennis=)

Thanks Jim.

By the looks of it i might opt to get a motor/sound decoder for the 2-10-4 to to quickly get it up and running.  I will then do the 2-8-0 as a separate project as it looks to be more complicated.  If something goes wrong on the 2-8-0, at least I have the running 2-10-4 to take away the frustration while watching it run =)

I'll hold the questions for now, until the time I have the locos with me.  I will definitely keep in touch =)

Thanks,
dennis=)

Thanks simkon/Terry.

Ears.. check.
EZ Command.. check.
EZ Tracks.. check. (Steel)
220v to 110v transformer .. check.

I will wait for the 2-10-4 and check if its the newer release.  If the 2-8-0 would need a major alteration, then id probably stick with the 2-10-4 until i get confident enough in putting in sound to locos with on-board dcc.

Now i need to decide whether to go with one decoder for motor and sound, or two decoders in one loco.  I read there's a bit of an effort to make the two decoder setup work.

dennis

Hi, I am very new to this hobby (assuming i survive).  Out of impulse i bought a couple of locomotives from ebay. 1 x 2-10-4 Santa Fe (#51205), 1 x 2-8-0 Consolidation (#83601), and 1 x 2-8-0 Consolidation (#81175 N-scale).  Never mind the N-scale for now, but I would want to add sound to either or both of the HOs.  I've read through threads in the forum(nose bled once or twice) on adding sound to locos, but i'm not sure how much they apply to what i have.  The challenge is, I'm from the Philippines, and i can only get stuff online/overseas since the hobby here is totally nil.  I need to absolutely get the right stuff since i can't just run to the local hobby shop for parts.  Right, so now i need to sort a couple of things:
a) Would it be as simple as plugging in Sound Only decoders to my locos?
b) Does the 2-10-4 already have speakers? or do i need to buy them separately? (haven't received the engines yet so i can't check)
c) Since I have DCC on board, will a sound only decoder suffice? and which model for my engines? Or shall i go for the expensive TSU-1000
d) I've read about JST 9 to NMRA 8 adapters, do i need them?
c) Haven't seen the engines, do i need to drill holes? (i might need to get a dremel tool)

A lot of my friends (local toy collector club) is telling me doing this is insane given that no one else is into trains in the club or the the country for that matter, but i'd like to find out for myself if its worth it.  I need to know all the stuff that i need first so I can ship them all at once (reducing cost).

(oh, last time i did some soldering was when i was in school, wayyy back =) )

Thanks,
dennis=)