Hi
Have a E-Z Control Centre. Happy with it and does what I need.
What does the i/o port get used for ?
Has anyone built any devices to make use of this port. Like a handheld knob etc that repeats the settings (speed and direction) on the master unit only master or hand held use at one time.
OR is there a second throttle design that allows two controlled locos at once each on separate throttle.
And out of left field X!! -- would a Fremo modular dcc hand held control work with the E-Z ? The Fremo has a dedicated loco decoder and plugs into the network. (works apparently on any network, Digitrax etc) Has one knob only and a reverse/forward switch
Thanks
Charles Harris
The I/O port is for the Bachmann #44907 Walk-Around Companion with the E-Z Command® Plus Control Center. The Walk-Around controller is no longer available, except on the used market.
Len
Hi
Thanks for message. Mine is not the 'plus' version but has the i/o port. Can the 44907 be used with mine?
Thanks
Charles
Quote from: Len on December 23, 2024, 12:28:26 PMThe I/O port is for the Bachmann #44907 Walk-Around Companion with the E-Z Command® Plus Control Center. The Walk-Around controller is no longer available, except on the used market.
Len
Is there a reason why it was discontinued? did it not work well?