Bachmann Online Forum

Discussion Boards => HO => Topic started by: 686 Shooter on April 11, 2024, 02:09:17 PM

Title: You Need 80-ton Shay Driveline Parts?
Post by: 686 Shooter on April 11, 2024, 02:09:17 PM
As anyone who has ever had a Bachman 80-ton 3 truck Shay knows, the driveline components crack and split. Also, the bearing blocks are difficult to remove without breaking the small tabs that hold them on.

I found a fellow on Ebay selling 3D printed parts for these. Specifically, the bolsters and the bearing blocks.

https://www.ebay.ca/itm/305444954879?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=irzUYn5vTGi&sssrc=2047675&ssuid=ulh9LFj1Sh6&widget_ver=artemis&media=COPY

If the link doesn't work, just search "Bachmann Three Truck Shay Driveline Repair Parts" and they should come up.

They aren't cheap, that's for sure. But I ordered two sets just to see if they were any good. And they fit perfectly. In the photo below the bearing block on the left is a factory one. The one on the right is the 3D printed one from Ebay. This fellow did an amazing job recreating these.

(https://live.staticflickr.com/65535/53647635739_b8baa22412_c.jpg) (https://flic.kr/p/2pJEa3T)

I'm not the guy making these, nor am I getting any kind of commission or anything like that. I just wanted to put this info out there as I am sure others are looking for these as well.
Title: Re: You Need 80-ton Shay Driveline Parts?
Post by: Philip on April 12, 2024, 11:26:48 AM
Lambert locomotive Works also sells the clips.  https://www.lambertlocomotiveworks.com/shay-driveline-retention-clips