Print Page - GE 70 Ton axle centres

Title: GE 70 Ton axle centres
Post by: LBS on October 04, 2011, 03:17:03 AM

hi from the UK,
can any member give me the axle centres for the Bachmann GE 70 Ton loco as following,the first front hood drive axle to the cab rear forth drive axle centres, also the first and second power axles centres, has i want to use a GE 70 Ton loco for on30 kitbash,
thanking you Mike,

Title: Re: GE 70 Ton axle centres
Post by: richg on October 04, 2011, 01:19:05 PM

As measured with a digital caliper.

first front hood drive axle to the cab rear forth drive axle centres

92mm

first and second power axles centres

23.8mm

A picture is worth a thousand words.

(http://i98.photobucket.com/albums/l267/richg1998/Spectrum%2070%20Ton/Spectrum70tonwheelbase.jpg)

Rich

Title: Re: GE 70 Ton axle centres
Post by: LBS on October 04, 2011, 02:27:12 PM

hi Rich,
top man thanking you for picture and measurements,
kind regards Mike,

Bachmann Online Forum

Discussion Boards => HO => Topic started by: LBS on October 04, 2011, 03:17:03 AM