Print Page - Using Surface Mount Devices

Title: Using Surface Mount Devices
Post by: richg on February 22, 2011, 09:57:44 PM

Some of you might like using SMD LED's so here is a link. This guy has been discussing this in a couple Yahoo DCC Groups.

http://www.nmra.org.au/Hints/SMDs/Using%20SMD%20LEDs.html

Rich

Title: Re: Using Surface Mount Devices
Post by: Cowboy on February 23, 2011, 08:51:38 AM

Thank you! That is very informative.

Title: Re: Using Surface Mount Devices
Post by: jsmvmd on February 23, 2011, 12:43:42 PM

Dear Rich,

Many thanks ! Good tips for me, and it helps to stir the imagination !

Best Wishes,

Jack

Title: Re: Using Surface Mount Devices
Post by: richg on February 23, 2011, 01:23:25 PM

The fellow who does this makes HO scale workers carrying a lit lantern. You need a fine tip soldering iron and a Optivisor is a big help.

Rich

Title: Re: Using Surface Mount Devices
Post by: NarrowMinded on February 23, 2011, 10:38:08 PM

Thanks I had tried this with varied success, I'll have to try your technique.

NM

Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: richg on February 22, 2011, 09:57:44 PM