bachmann e-z remote turnout 44561

[Josprieto]

Where I can find some instruction for electrical installation of bachmann e-z track remote turnout (code #44561)?

[rustyrails]

I don't use EZ Track, but the following information is from Bachmann's "E-Z Model Railroads" by Chris Lane, so I assume that it is accurate.  Included with the switch is 1) the switch; 2) the switch control box; and 3) the red power wires.  The power wires are attached to the AC terminals on your power pack and the other end (with the plug) is plugged into the left side of the control box.  The green three-wire cable coming from the switch plugs into the bottom of the control box.  Additional switch control boxes can plug into the right side of the original box.  Hope this helps
Rusty

[Josprieto]

Thanks! I will try it.