Mrc Railpower 1370

[usher42]

What screwdrivers to move the screws on the unit? I've tried different sizes pf philps screwdrivers but i cant get the screws move. what am i doing wrong     Gary

[usher42]

no i'm refering to the screws to hook up the wires to the unit.  Gary

[Jhanecker2]

There are complete sets of tips to remove tamper proof or security fasteners.  I bought a set at Ace Hardware.  Make sure you have the correct tip for the screw you are trying to remove and you are turning the screw in the correct direction . Also try some  WD -40  or penetrating oil. Sometimes you can try tightening the screw and then untightening the screw but beware  of shearing off the screw head . Good Luck.  J2

[mtlatc]

I have to ask. You are going Righty Tighty, Lefty Loosey right?

[Hunt]

Gary,
Hmm... Perhaps the folks at MRC (Model Rectifier Corporation) would be interested in your difficult with the screws in their Railpower 1370 power pack.

MRC e-mail  click    [email protected]

[az2rail]

If the back of of your MCR 's uses a combination screw, try using the standard slot. One of my transformers has that, but it looks like the phillips part is to wide in the center to work well..

Bruce

[PaulDeS]

The screws on my MRC 1370 (those where you attach the track and accessory wires) are medium sized Phillips head screws. I didn't have any problems loosening them with a medium Phillips screwdriver.