How do you turn the power off on a E-Z Command

Started by Barry, October 19, 2008, 10:27:43 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Barry

October 19, 2008, 10:27:43 PM
How do you turn the power off on a E-Z Command - I cannot find a switch or button sequence to power down. 

WoundedBear

#1
October 19, 2008, 10:36:34 PM
Unplug it....there is no "switch". I screwed a switched power strip to the edge of my benchwork and plugged the EZC into that. Flick the switch on the strip and the EZC goes dead.

Sid

Yampa Bob

#2
October 19, 2008, 10:47:10 PM
Ditto the switched power strip on my layout. Hardware stores have them, I happened to have an extra surge protector type.  Most types have a pilot light for visual assurance that it is turned off.
I know what I wrote, I don't need a quote
Rule Number One: It's Our Railroad.  Rule Number Two: Refer to Rule Number One.
Print
Go Up Pages1
User actions