E-Z Command Dynamis DCC Controller

[SvFiat]

Hi, I've seen very little mention on this device and even less information on it.
According to the sales pitch this is what it should be able to do:

E-Z Command Dynamis DCC Controller

Features

    * Advanced wireless infrared operation
    * 2.5 amp power supply
    * 128 speed steps
    * Full CV programming
    * Full NMRA conformance
    * 9,999 locomotive addresses
    * Turnout and accessory control
    * Expandable modular design
    * Easy-to-use backlit LCD screen
    * Allows 40 consists of up to 5 locomotives each
    * Control of up to 40 locomotives at any one time (up to 21 functions per       locomotive)
    * Suitable for all layouts from train sets to sophisticated railway systems
    * Joystick control for speed and on screen selection

     I already own a Easy command controller and several dcc engines and I'd like to go to the next step of being able to control the cv's of each dcc decoder. From what I've read in other forums the Dynamis doesn't have the cv prgramming ability it claims to have. I've been looking for days for a pdf file of the manual that comes with it. Any help would be greatly appreciated.

Thx,SvFiat

[r0bert]

it has CV programming on the main (OPS Mode)

[richG]

Here is a little info. http://www.bachmanntrains.com/home-usa/board/index.php/topic,5398.0.html

http://cs.trains.com/forums/2/1440174/ShowPost.aspx#1440174

One thing you have to realis is most negative answers are by those who have never used the Dynamis.
I use the NCE system but I know the Dynamis has possibilities.

Rich

[prebres]

May I direct your attention to this link http://www.dynamisdcc.com/about.php?lang=en

[SvFiat]

I was referring to the ad that states "Full CV programming" with the 36505 unit. From what I've read the 36508 which is the Pro unit will.

This forum thread pretty much explains the Dynamis pretty well >>

Http://www.rmweb.co.uk/forum/viewtopic.php?f=10&t=21976&p=338850

SvFiat

[SvFiat]

I Purchased the Dynamis and it came in today been setting it up and that part was easy. I have made a pdf file of the manual for anyone that's interested leave your e-mail I'll send it.

Another thing worth mentioning I purchased this from Ohio Valley trains

http://www.davistrains.com/index.htm

They are going out of business and selling off their stock really cheap I purchased the Dynamis for $135

Have a nice day ...........

[prebres]

That's a deal! Is Milford near Dayton? I'm about 5 hours from Dayton.

[hgcHO]

I just ordered one!   "E-Z Command Dynamis DCC Controller"   He said they had 5 in stock but now 4.

HGC

[bernie7787]

SvFait,
   Could you send me your PDF on Dynamis.
       THANKS,
                      [email protected]

[r0bert]

most everything is covered here
http://www.dynamisdcc.com/faqs.php?lang=en