Info on FT with decoder #H601x-PC801

[StanW]

Need info on above decoder

[the Bach-man]

Dear Stan,
The decoder is built into the circuit board. It is dual mode, so the loco will run on analog power.
Have fun!
the Bach-man

[StanW]

Thanks for the info

My problem is that decoder pro is not seeing the decorder to program it. Any ideas.

Thanks Stan

[Hunt]

Thanks for the info

My problem is that decoder pro is not seeing the decorder to program it. Any ideas.

Thanks Stan

Using Decoder Pro with a Digitrax Zephyr?
Then a workaround is required to program a non-sound Bachmann decoder using a Digitrax Zephyr.

Workaround ---  Place a 1000 Ohm resistor across the programming track. Remove the resistor after you finish programming the Bachmann decoder.