Cutting EZ Track

[Vinny]

I need some advice concerning EZ Track. I model in N scale and I have to cut some pieces to fit my track plan. What is the best way to cut the EZ Track? I tried a model saw and it worked well but I need to remove a tie from the cut edge. Do I have to remove the rails and reinstall them? Thanks.

[the Bach-man]

Dear Vinny,
Use an Xacto knife to trim the ties. Work it carefully under the tie first, then use the point to cut under each rail.
Have fun!
the Bach-man

[Vinny]

What type of Xacto knife do you recommend and how do I get the blade from lifting up the rail?

[Seasaltchap]

Vinny: "When you have done learned that my son, you will be a Scratch Builder!"

[Vinny]

Well, I've already ruined three pieces of track trying to figure it out. Any other suggestions? I appreciate your feedback.

Vinny

[Seasaltchap]

Have you tried a "Dremel" with a wheel.

DON'T FORGET TO WEAR EYE PROTECTION!

[GlennW]

Vinny:
After cutting the track you may need to trim off the plastic "spikes" and a bit of a tie to put the rail joiners on. You may also need to file off some flash.

Next time you may want to build a rail jig or mitre box to hold the rail steady while cutting it.

[Vinny]

Thanks! I appreciate everyone's help.