no lights

[paulb321]

 :)On my two bachman dcc,locos the head lights do not
work.Tried one way by pressing function and the #1
buttonas directed,but still no lights.This is a new set
out of the box.Any help is appreciated.

[Jake]

What are you using to control your trains? Assuming its DCC, what brand? If it is the Bachmann E-Z command, try pressing the #10 button. Last I remember that was the function button for headlights.

[paulb321]

I am using the bachman E-Z command controler.According
to the label on the controler #10 is for the analog loco,
if one is used in conjunction with a dcc loco on the
layout.

[Guilford Guy]

Function 0 on DCC is headlights. Press the function button, then #10.

[paulb321]

 :)Nope, no lights function and #10 does not fix the
lights still no lights.

[Guilford Guy]

You pressed function, and then 10?

[paulb321]

 ::)Thanks guy's, yes I did function then and #10
turns it on,function then #1 goes dim to bright.
Bright is brighter than dim,but it is not what I
would call much of a light even on bright.The
need of a different LED is needed here I think.
Thanks again for all of your help folks.