EZ command

[BrianD]

I am new to DCC. Is there a difference EZ command and EZ command plus.

[Yard Master]

Hi Brian,

While many of the features are the same, the E-Z Command Plus has a number of improvements over the original E-Z Command system.

-The E-Z Command Plus can control up to 29 decoder functions over the original E-Z Command's 9 functions.
-An LED speed indicator has been added so that you can determine the relative speed of your locomotive when you turn the control knob. This way you can easily tell whether you are running at low, medium, full speed, etc.
-The existing E-Z Command has an emergency stop button that stops the movement of all trains on all tracks. On the E-Z Command Plus, you can also make an emergency stop of the actively selected locomotive by pressing down the control knob.

The only other major difference withe the Plus is that due to internal design changes, it is recommended to have a separate programming track for assigning addresses to locomotives. "Programming on the main" is still supported but changing addresses will cause the address of all locomotives on the main to be changed.

We hope to have a video on our YouTube channel soon overviewing the E-Z Command Plus features and how to operate the system.

[Ralph S]

Mr. Yard Master,
You bring up a new question with regards to the difference with the EZ command and the EZ command Plus.
So, I created a new topic... Please check it out...