HO wiring

[Arjay]

Need help to wire HO layout with one large oval containing 2 left and right switches and a 30 degree crossover.

Where do I put the insulators and where do I use twin connectors?

I can send a layout if that helps.

Thanx

[jonathan]

Do you mean you tried to combine a large oval and a figure 8?  If so, you have set up a very complicated situation.

Regards,

Jonathan

[Len]

If you're doing what Jonathan described, you put the gaps so they isolate the red and white sections of track as shown in this diagram:



Decide which half you want to be the 'reversing section' and which half will be the 'main', then wire accordiing to the instructions that came with the twin.

Len

[Arjay]

Thanx.

That is the layout I am trying and will follow your advice.

I am an O Gauge guy just learning the polarity issues wit HO.