N scale engine Idenitfication

[Superk]

I just acquired a bachmann diesel engine and I'm trying to find out what exactly IO have.   Is there a place I can go to find out about it?  It's a Union Pacific engine that has a number 9202 under the window.  It also has a card decoder inside tagged "N860X-P02B.  I'm pretty new at this and I know just enough to know what I don't know.  Any help would be appreciated.  I did not get a box with it.
thx
Ken

[Superk]

Also wanted to ad that it has Spectrum written on the bottom.

[Terry Toenges]

This should be it. N Scale Bachmann Spectrum Union Pacific GE Dash-8 40C UP 9202. It looks like it was released in 2003.
http://tycotrain.tripod.com/bachmann-nscale-locomotives/id208.html

[Superk]

Thx terry.  That does look like it.  Now if I can just figure out what the card inside is, I'll be in business. 

[Len]

The 'card' is a PC Board with the pick-up, lights, and motor connections on it. This loco is Backmann item #85052, and is "DCC Ready". Which means there should be a 'dummy plug' installed on the PCB. Remove the 'dummy plug' and you can plug in the decoder of your choice for DCC operation. There may also be 8 solder pads, numbered 1 - 8, on the board for hard wiring a decoder in. If so, the color wire that goes to each pad can be found at the bottom of this diagram:
https://www.bachmanntrains.com/home-usa/dwg/dwgs/N850X-IS001_2.PDF

Len

[Superk]

Thx Len for the info.  The engine sort of runs, but I think it needs some cleaning and a little work   I only gave $5 dollars for it so I figure I can use it for a learning experience if nothing else.  At least now I know what I have.

Ken