Terminal Re railer

[piggy back]

I bought a 4x8 layout from guy off of craigslist last year! The track is HO Atlas Code 100! It's powered by Atlas Rail Joiner wires.  I just bought a Bachman DCC EZ Command! I was wondering does Bachman or any track manufacture make a HO Terminal re railer that accepts Bachman plugs, that is  not EZ track, but standard HO code 100 track?

[Flare]

As I recall, my old E-Z Command came with two cables, one for E-Z Track and another with bare wires at the end that you can splice into the Atlas ones.

If that's no longer the case, you can get the wire with bare ends from Bachmann here:  https://estore.bachmanntrains.com/index.php?main_page=product_info&cPath=74&products_id=8411

(or you could cut off the E-Z Connector and splice its cable's wires onto your layout)

[bbmiroku]

Easiest way is to take the scissors to the connector.  LifeLike made one that is almost the same size as Bachmann's, but the tongs were spaced a bit too far apart to accept it.