4-6-2 dcc connectors

[indian_hills_r_r]

i just purchased a Bachmann spectrum 4-6-2 k4 pacific penn #3750 post war w/modern pilot. the tender came with a two wire connector and a 4 connector. The two wire connector wires are broken off. There is wires, one is black , the other is brown. Does anyone know the wiring specs. ?  Is the brown wire closest to the 4 wire connector or is the black one closest. The blowup shows the wires but not the colors.

[Bucksco]

Is the PCB mounted in the center of the tender or is it mounted on the rear of the tender?

[indian_hills_r_r]

I haven't opened the tender yet. I am traveling so I don't have all my tools for my trains. I will be home in oct. at which time I will open the tender.

[indian_hills_r_r]

yardmaster , I opened the tender and found the board in the center of the tender. I also found where and how the wires go. I need to call Bachmann service to see if they can (1.) fix the wire connector  (2) the scrapers behind the drive wheels are bent and can be fixed or replaced. I was looking at digitrax  decoder  dh163 LO which looks like a pcb/decoder with a 8 pin connector on it. I think it would work.

[indian_hills_r_r]

I was able to find new connectors with wire for this engine from JST. after about 5 mins of work and soldering two connections the loco is running fine