How to install decoder into Decapod?

[nemesys]

I got a Decapod a few weeks ago. DCC ready. So, I just got the Bachmann decoder for it. However, there is no harness, no wires with the decoder. How am I supposed to connect it?

[jonathan]

I am curious as to what kind of "Bachmann" decoder you have.

There are decoders embedded in PCBs (an electronics board) that are used for some diesel installs.

Typically, the standard Bachmann EZ decoder comes with connector wires at a minimum.  I purchase the decoders that come with the 8-pin plug already attached to the wires.

Can you describe the decoder you have?

Regards,

Jonathan

[Hunt]

HO scale

Click Here for info. You add writing harness with 8-pin plug or hardwire.

[Hunt]

Correction

HO scale

Click Here for info. You add writing wiring harness with 8-pin plug or hardwire.

[rogertra]

Correction

HO scale

Click Here for info. You add writing wiring harness with 8-pin plug or hardwire.

There is an option to edit your post if you make an error.  Like I have just done to add:- It's called "Modify" in the top right hand corner of your post.   

Roger T.

[Hunt]

There is an option to edit your post if you make an error.  Like I have just done to add:- It's called "Modify" in the top right hand corner of your post.  

Roger T.

Thanks Roger T.

I am aware of and know how to use all the features of the Simple Machines Forum (SMF)  software used by Bachmann for this forum. What you are unaware of is I do not have acceess to a few of the features you and others do, which includes the Modify feature. 

[Hunt]

More. . . 
Thus without Modify for corrections I use the Quote feature as follows,

Thanks Roger T.

I am aware of and know how to use all the features of the Simple Machines Forum (SMF)  software used by Bachmann for this forum. What you are unaware of is I do not have acceess access to a few of the features you and others do, which includes the Modify feature. 

[nemesys]

HO scale

Click Here for info. You add writing harness with 8-pin plug or hardwire.

Well, thank you but i was already aware of the installation PDF. Problem is, I don't have a harness and I can't find any. Where do I find those harnesses?

[Hunt]

Bachmann Trains is one of many places selling a DCC 8-pin plug wiring harness.

Click Here

[nemesys]

OK, so, I got a Soundtraxx harness with the 8-pin plug. I followed the instructions to solder the wires to the appropriate pins on the decoder. Now, when I put the loco on my programming track, the Soundtraxx PTB-100 board lights up the red LED steadily, indicating a fault with the wiring. Knowing that, I did review the connections I made and I believe they are correct. I mean, it's not very hard with the colored wires to hook them to the right place on the decoder.

So, once I got the decoder in, is there anything else I need to do?

[nemesys]

OK, so, I got a Soundtraxx harness with the 8-pin plug. I followed the instructions to solder the wires to the appropriate pins on the decoder. Now, when I put the loco on my programming track, the Soundtraxx PTB-100 board lights up the red LED steadily, indicating a fault with the wiring. Knowing that, I did review the connections I made and I believe they are correct. I mean, it's not very hard with the colored wires to hook them to the right place on the decoder.

So, once I got the decoder in, is there anything else I need to do?

Anybody?

[Trainman203]

I don't install my own decoders  , but I suspect a Google or YouTube search will give you what you need.