Seaboard modern 4-4-0 # 106

[hmachiz]

I am having great difficulty re-setting the CV's on the Tsunami decoder. I am using the digitrax Zephyr Xtra. Anyone have any ideas on what I can do? I finally set the address using the BLT address changer. Nothing else worked.

[Len]

You have to use 'Blast Mode' with the Zephyr or Zephyr Xtra to program Tsunami decoders.

Read the instructions carefully, and make sure nothing else is on the track when you do this.

Instructions can be found here: http://www.digitrax.com/tsd/KB33/programming-soundtraxx-tsunami-decoders-with-digit/

Len