trac shorting out

[Truckbuck9900]

hi i have ez trac and have a short in the track. if i unhook the track from one side of the power track source it goes out but only have about 1/3 of the Tampa on one rail as to the other rail. any i ideas where i can look for the problem?

[Flare]

Is your track configured with a reverse loop, wye, or other method that would allow a train to turn around?

[Truckbuck9900]

No it isn't but i took a meter to each peace and found the problem. For some reason part of an older track was causing the problem. Thank you for your help. I am new to this hobby and everyones help is greatly appreciated .