HOW TO PROGRAM DCC TURNOUTS USING DYNAMIS

[tigerthelion]

After some frustration I figured out how to program my dcc turnout using the Dynamis system. Here's what you do:

1. ALWAYS use a service track or isolated track for programming as it not only protects your loco/accessory it protects all other decoders from being reprogrammed.
2. PRESS the mode button to view accessories and go to accessory 3 as it's the default address
3. PRESS and hold the programming button on your turnout and it will toggle back and forth (twice)
4. ENTER the new address
5. PRESS either straight/divergent button and turnout will toggle four times

Hope this helps!