Regular turnouts on DCC layout.

[cramsay]

Sorry if this has been covered before. With HO NS EZ Track, are regular EZ Track turnouts(example a #5 right-hand) going to work all right on a DCC layout rather than buying the equivalent DCC turnout? They will not be run through the controller(MRC Prodigy Advanced)-- the provided push-button switches will just be mounted on the edges of the benchwork. Thanks!

[Flare]

They WILL work, but they will need their own AC power source.

An inexpensive analog controller with accessory terminals is ideal.

[cramsay]

Hey thanks! As a matter of fact I have an old EZCommand DC controller and power pack.

[Deland]

That's how my temporary setup is wired.