Spectrum 2-8-0 Traction Tire Replacement

[cmsluss]

Greetings all -

I have a Spectrum 2-8-0 Consolidation that needs traction tires.   I would value advice and tips from those who have done  this job before I tackle the project.

Thank you!

[gatrhumpy]

I've never done it before, but it's not that hard. Just gently remove the side rods from the wheel where the traction tires (TT) go, put them on gently using a micro screw driver to put them around the wheel, and then put them back.

[cmsluss]

Thank you for your tip!  I appreciate the help! I don't want to get the drive wheels out of quarter, so I thought I'd get some input from folks who have changed the 8mm tires. 

[plas man]

I have checked mine and it looks like there is a slot for screwdriver in the screw on the fly crank , but it looks like the fly crank and screw head and crank pin is one piece moulded base metal

why Bachman did you not put tyres on the second axle , as these are not connected to the valve gear ?

[RGPerkins]

I respectfully request that Bachmann post a link to the instructions on how to replace traction tires on this locomotive and each of those locomotives they offer especially in n-scale.
Perhaps a simply YouTube video would be an excellent option for instructions.

[cmsluss]

I really appreciate the excellent input and suggestions!   I'm glad I created this post!
I do agree it would be much more convenient if the traction tires of the 2-8-0 were on an axle not connected to the drive rods.
I have the Spectrum 4-8-4 Class J... and the traction tires are much easier to access with the drivers not connected to the rods.

Thank you all!