Old 6607 PP

[Bernie D]

 ???Can they be hard wired as to the red power  to track line with regular clip on? I bought one and the picture shows no screws, from the photo angle.it is claimed to be older version but new/in box pp. Can I just splice a EZee track red wire the existing red wire.?
thanks Bernie

What is the difference between a 6607 and a 6609?

[Len]

The 6607 was marketed for HO and N use. It should have 4 output screws, 2 for DC track power and 2 for AC accessory power. The 6609 was intended for G trains and only has 2 output screws for DC track power. There is no AC accessory output

Len

[Bernie D]

So the 6609 could still be used for HO"S Right?
I guess the picture of the 6607 has the screws ,but the angle just doesn't show it. All i need to do is take off the exiting rd wire and put on the Easy Track.
Thanks

[Len]

The 6609 could be used for HO, just be careful not to crank it up to full voltage. A lot of the newer locos can morph into 'crispy critters' if you hit them with much over 12VDC.

Len

[Bernie D]

Okkedoke
Thanks