Dynamis command station

[ritlew]

Recently acquired the above system Set up ok but I am not able to make any changes to the CV's to suit my needs
Any assistance would be helpful
Running a Kato Gevo with Digitrax DN163k1c
Many thanks
Ritlew

[Bucksco]

The Dynamis will program all CVs. You may want to check into the decoder.....

[AGSB]

Exactly what are your "needs"?

[ritlew]

To be able to understand if and when the instructions have taken effect as there seems to be no indication of any effect.
Reset works

[richardl]

Exactly what did you do that did not seem to work?

Loco brand, type of decoder, etc?
All my successful reprograms have been indicated by a two or three lurch of the loco.

One time I had an error indicated by flashing of the headlight a number of time.
I use a NCE Power Cab and program track option.
The manual told me all I need to know.
Not familiar with the Dynamis.

Rich

[ritlew]

Hi
I think I have solved the issue Have moved to a programing track and not main track and I now see action ie PROGRAMMING happening.
Many thanks
Regards