Dynamics

[PawPaw Al]

How do I disable or unlock having to hold hand set facing receiver all the time to keep trains running
Thanks pawpaw Al

[DAVE2744]

I am assuming the system uses infra-red signal transmitting,  therefore is line-of-sight, like your TV remote.  Check and see if you can add additional receivers to the system,  placing them around/over layout.  I have a Digitrak system with 2 receivers, one under the layout, benchwork at 42" hgt, and one up near the ceiling.  No dead spots.  You may need a couple more, trial and error.  Hope this helps,  Dave

[Hunt]

PawPaw Al,

Click Here see
Dynamis Menu Reference,  page 24

Press [MENU] and scroll to, EDIT TRK TIMEOUT, scroll to No timeout and press the accept key.

After setting "No timeout" the power to track will no longer be cut when Dynamis handset and command station the line of sight is lost. When line of sight is lost,  there is no control of what is on track.


DAVE2744,
Digitrak [sic] --- Digitrax

[PawPaw Al]

Thanks a lot for the help. Makes it much easier to control