bachmann ez track with MRC Prodigy Wireless

[fpgintern]

Newcomer to model railroading. Completely numb as to DCC. Went to the Edison show and received advice to use ez track along with MRC Prodigy Wireless. Did so. Have no idea what to do with the ends of the red wire that comes from the Bachmann terminal track. The Prodigy Wireless box has a Main/Program box, but if I plug both Bachmann contacts into that, I get an overload (OVLD) message. Can anyone help on this one? Thank you very much. Hope this question is not inappropriate.

[Hunt]

Red wire end with flat black plug connects to the Bachmann E-Z Track Terminal Rerailer. Other end has spade connectors.

Cut spade connector off each Bachmann track red wires (two wires). 
Strip enough insolation from each wire to permit inserting into the Prodigy Command Station green plug Main Track terminals. Refer to the MRC Prodigy Wireless User's Manual, page 2-1. You will need more wire for the separate Program Track. 

Need more help  - Contact
     MRC (Model Rectifier Corporation)
     email [email protected]
      call 732-225-6360