Switch connections

[Chief1601]

I am building a layout for my grandsons and have installed several switches.  I am finding that the power wire and switch wire connections to the directional switch are not too tight/secure and come loose easily.  Does anyone have any suggestions on making these connections better?  Only thing I could think of so far was to hot glue them into place. 

[Jerrys HO]

You must not be pushing them in all the way as I have to wiggle mine loose when I have to.
You can always switch them to a DPDT momentary switch such as this one...
http://www.radioshack.com/dpdt-20-amp-momentary-flip-switch/2750709.html#start=3

[Chief1601]

Thanks.  I will try pushing them in harder.   

[Jerrys HO]

Chief,
Is it the green wire plug or the red power plug? If it's the red power plug are you ganging the switches together as I could see that being loose and the hot glue would help but the plugs fit snugly on all I have fooled with.

[Chief1601]

Both connections seem loose.  I will give them a good push tomorrow.  Didn't want to be too rough with them.  Thanks