Problem with a DCC #6 Single Crossover Turnout - Right

[Scott1943]

I have both a left (#44137) and right (#44138) DCC #6 Single Crossover Turnouts.  I am using a Digitrax DCS 51.  I had the switches programmed to work as Switch 1 for the Right Turnout and Switch 2 for the Left Turnout.  Every thing was working great for a week.  Now Switch 1 is not functioning.

I put the right turnout on a separate set of tracks with the DCS 51. Turned the power on to the tracks and switch.  Checked to make sure power went from one end of the track, through the switch and out to the other end of the track. Have power end to end.  I removed the programming button cover. Used a pen to press the programming button for two seconds.  But the turnout did not toggle at all.

I had this problem in January 2014 (2013 Christmas gift) on this switch and had to send it to Bachmann.  I am hoping that I can find a solution so that I can run my multitude of locomotives on my layout this year.  Don't want to send it out.

Thanks for the help.