News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Gordon

Started by Fergusfan17, April 12, 2014, 10:46:16 AM

Previous topic - Next topic

Fergusfan17

So today I got Bachmann Gordon and I must say I love him. However, when I tried to run him with the express coaches, he would not tolerate BACHMANN's E-Z track system of curves (i.e the radius of the curves). Either he would stop because his wheels were not touching the ground, or he would derail every time he went over a curve. I have three questions.
1.) why is this is problem if I am using a BACHMANN train on BACHMANN track?
2.) how can I fix this problem?
3.) if I cannot fix it, what other tracks systems do you recommend that would work?
P.S.- I also have spencer and Henry both of them EDIT- WORK THEY BOTH WORK

PaulGWR

Sounds like the radius is too tight, what radius are they?

Fergusfan17

Quote from: sodorfan on April 13, 2014, 10:10:53 AM
Sounds like the radius is too tight, what radius are they?

18"

Br 98.75

try removing the rear bogie on the
locomotive Henry and Gordon share
a chassis henry can make a 18"

Fergusfan17

Quote from: Br 98.75 on April 13, 2014, 10:42:58 PM
try removing the rear bogie on the
locomotive Henry and Gordon share
a chassis henry can make a 18"

Did not work
???

PaulGWR

How much space is there between the wheels and chassis? Most engines will have enough room in the center driver for it to "slide" to help it run on curves with ease.

Fergusfan17

#6
Quote from: sodorfan on April 20, 2014, 09:13:25 PM
How much space is there between the wheels and chassis? Most engines will have enough room in the center driver for it to "slide" to help it run on curves with ease.

About 2.5 inches? Give or take

Rollin Mayham

Try using 22" radius curves they are a lot bigger but they might answer your problem.

PaulGWR

Just wondering, how's Gordon on switches, I recently got him (fantastic model) and he struggles a little, is he the same with you? ???

Fergusfan17

Quote from: sodorfan on May 03, 2014, 01:31:13 PM
Just wondering, how's Gordon on switches, I recently got him (fantastic model) and he struggles a little, is he the same with you? ???


No, he does fine on switches, it's just the curves!

PaulGWR

Quote from: Rollin Mayham on May 02, 2014, 11:27:34 AM
Try using 22" radius curves they are a lot bigger but they might answer your problem.

Yeah, it seems it's seems that he struggles on 18" radius curves.

Fergusfan17

Quote from: sodorfan on May 17, 2014, 02:55:28 PM
Quote from: Rollin Mayham on May 02, 2014, 11:27:34 AM
Try using 22" radius curves they are a lot bigger but they might answer your problem.

Yeah, it seems it's seems that he struggles on 18" radius curves.
What's ironic is that Bachmann sold a set a while back that had Gordon and his express coaches going around an 18" circle!!!
Wow...