2-10-2 led wire

[boxcarbuz]

Help I had the red wire for the rear light come off the circut board and I do not know where to solder it back on.

[richg]

Get a Optivisor or other magnifying glass and good light source. The spot will be very evident. You will need a fine point tip soldering iron.
In the below link you can see there are labels on the PC board. Yours should have similar labels.

http://www.tcsdcc.com/Customer_Content/Installation_Pictures/HO_Scale/Bachmann/Bachmann_Spectrum_USRA_Light_2-10-2/Bachmman_Spectrum_USRA_Light_2-10-2.html

Rich

[boxcarbuz]

Rich,

Thank you for the information. I got it soldered on with no problem,
Al

[richg]

Rich,

Thank you for the information. I got it soldered on with no problem,
Al

Very good.
In case you are interested, I Googled bachmann ho 2-10-2 pc board and that link was near the top of the list.
Save it in Favourites. There is info on other Bachmann locos also and some Bachmann locos sold on the  other side of the Pond.

Rich