Headlight Lamp Suggestion

[wb2002]

HO using DCC (Digitrax DH163, DH140) and Life-Like Proto 2000 E9. Loco not dcc ready and hardwire decoder install. What are some suggestions of bulbs I could use. Could not find reccommendation on web site.

Thanks

wb

[Br 98.75]

http://www.modeltrainsoftware.com/
i use them the are in walthers but its cheaper to order from them directly. you can get the dcc ready stuff that has all the resistors in it
to remove the varnish on the wire dip the leads in s dot of hot solder

[wb2002]

Thanks. I wanted to know if there were any that had experienced with the replacing the bulb for the HO Proto 2000 E8/9 locomotive and what they actually used.

Thanks again

wb

[dakota12]

http://www.modeltrainsoftware.com/
i use this website and I know that it is cheaper to order from them directly. you can get the dcc ready stuff that has all the resistors in it
to remove the varnish on the wire dip the leads in s dot of hot solder, so this one could help.

Thanks for posting this info, I was in need of this also.  

[richg]

Not about Bachmann products so I sent you a PM.

Rich