Dynamis

[mudallal]

I'm interested in the Dynamis DCC.
I am planning a layout using the Nikle Silver EZ track  with Locomotive with DCC on Board .
If I use the Dynamis SYstem to operate the train and the tracks ,do I need Turnout remote switch wire
extentions ( 10') to connect the turnout switch to the power source or would the dynamis system work on the turnouts without the need for these extension wires
Thanks

[Jerrys HO]

If you purchase the ones that are DCC you can use most DCC controllers to control turnouts.

Jerry

[Doneldon]

mud-

You will NOT need to run wires to each turnout if you are operating them
with DCC. Your turnouts will use track power.
                                                                           -- D

[Joe323]

You will not need seperate wiring for the turnouts if you buy DCC equiped turnouts.  Some of us have hard wire non DCC turnouts to a seperate power source and switch panel because I for one prefer toggle switches to programing turnouts. But thats purely a matter of taste.

Some of my turnouts are manual