turntable jumper

[raptor106]

hi
question since my bachmann turntable dose not work well under dynamis controlle do I need that jumper if I remove the decoder. I want to use that gray switch that came with. I trying to fine the jumper that it came with when I got the turntable.

[richg]

hi
question since my Bachmann turntable dose not work well under dynamis controlle do I need that jumper if I remove the decoder. I want to use that gray switch that came with. I trying to fine the jumper that it came with when I got the turntable.

The jumpier will be right where you left it.

If this TT has the eight pin socket, use some bare #22 and plug, pin 8 to pin 1.
Connect pin 5 to pin 4. Better to strip the wire just enough to make a "pin".
No idea if the other pins are used for the TT but this should make the TT usable.
I have done that when I "misplace" the adapter.
Standard NMRA pins for DCC. Do a Google search for NMRA wires. The pins are standard for all decoders as far as I know so far.
The more knowledge you have about DCC and all its possibilities, the more you will enjoy DCC.

Rich