Bachmann Spectrum 2 truck Climax parts?

[VTBob]

Is there a regear kit maybe by NWSL for the main gear box? Mine's been sitting on the shelf for a long time needing the front gear in the box. The plastic gear split on the shaft which renders the front drive shaft inoperatible.

I don't really want to send it back for one of those fancier 3 truck versions if I can help it. I like the littler 2 truck version.

VT Bob

[richg]

Check with Dave at NWSL. You can do that as well as well as anyone else can. He does answer email. Dave has hepled me a few times.

Rich

[Ken Huck]

NWSL does have a re-gear set for the 2-truck Climax.  I haven't attempted to install mine yet.  They have a very extensive instruction sheet.  What you get gear-wise is six (6) beveled gears and two washers/spacers.  These are for the two trucks themselves.  I'm not sure if they have any for the main gearbox.
HTH
Ken

[VTBob]

it seems that my universals, where they enter the main gearbox are what has failed. You can spin the wheelsets by hand, & turn the driveshaft, but it sits there when you apply power, pistons whirring happily away, but doesn't move an inch.

VTBob

[Ken Huck]

I believe Bachmann sells those through their parts-department.
Check it out.

HTH
Ken