new Dynamis set trying to get set up for Christmas

[LargeFry]

just got a new dynamis train set and I'm having issues with the power supply; I think. The command station's led lights (both) flash very fast and inconsistantly. This happens whether the track is hooked up or not. User manuel doesn't have much of a trouble shooting section. Can anyone tell me what the led lights should be doing when working normally? Thanks

[LargeFry]

Thanks for the info Hunt. My problem seems to be with the command station. When I plug it in, in accordance with the manuel, I can't get a steady or constant led. I'm not too worried about the hand set right now because I don't think I've got power to the track. Can you check voltage across the track to tell? I don't get any voltage at the track and random voltage at the transformer lead that plugs into the command center. I was expecting to read 15 vdc.

[Bucksco]

Check the outlet you are plugged into. It needs to be grounded.

[captain1313]

The LED's on the base station will flash if the handset is not on or not communicating.  Follow the directions to link base and handset.

Kevin

[LargeFry]

Got it working guys. $50 later and a trip to Radio Shack, Wal-Mart, local hobby shop and finally Frys to find a new transformer or power supply that has the same dc and amp output as the original and the set works great now. Merry Christmas