power feeds on HO Steel track

[twstrains]

I just bought a BachmanThomas Set for the grandkids..It has steel track with black roadbed. If I double the amount of track do I need to add power feeds to the track? If so how do I do it?
Thanks

[Stephen D. Richards]

If you are only doubling the amout of track you get with the set, you should have plenty of power in your power pack.  Hope that helps,  Stephen

[jward]

you don't HAve to double the feeds, but it probably wouldn't hurt either. just make sure the plugs are both the same polarity otherwise you'll get a dead short.

[Doneldon]

tw-

Steel isn't the world's best conductor so one or two additional feeders would be a good idea.
I'd also consider a very light coat of something like Conductalube, Wahl Oil or another
conducting fluid which will seal the steel surface and inhibit rust a bit.

                                                                                                            -- D

[Len]

Both a 9in straight and an 18in radius curve 'Terminal Track' is available seperately. Using one of them would be the simplest way to add an additional power feed.

Len