News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

4-8-4 santa fe 3781

Started by highpockets, October 17, 2012, 03:29:26 PM

Previous topic - Next topic

highpockets

I have a 4-8-4 santa fe model i think 1977. Does not run  very good how to disassembable the unit Are there any instructions. Any comments on how to improve this model

union pacific 844


richg

No idea about the 1977 era.

I suspect below is what you might have. Many of the 4-8-4 design had the pancake motor which is not very good, over time. I believe all where three pole motors. They were essentially toyish type locos. Some included a smoke generator.
There was also a line of Bachmann 4-8-4 that had a can type motor and smoke unit.

http://www.hoseeker.net/assemblyexplosionbachmann/bachmanndaylightgs4pg2.jpg

There are a few more diagrams at the HO Seeker site for the Bachmann locos.

Rich




union pacific 844

i have a diagram of the bachmann northern 4-8-4 and 52' tender with smoke  and instructions the anther side this come with a santa fe   4-8-4  with a pancake motor

sd24b

Quote from: highpockets on October 17, 2012, 03:29:26 PM
I have a 4-8-4 santa fe model i think 1977. Does not run  very good how to disassembable the unit Are there any instructions. Any comments on how to improve this model
Is this the Spectrum?  Phil


richg

Quote from: sd24b on October 18, 2012, 12:45:23 AM
Quote from: highpockets on October 17, 2012, 03:29:26 PM
I have a 4-8-4 santa fe model i think 1977. Does not run  very good how to disassembable the unit Are there any instructions. Any comments on how to improve this model
Is this the Spectrum?  Phil

Spectrum line was introduced around 1988. His is 1977.

Rich

highpockets