Changing CVs with Bachmann

[Forrest]

My HO layout uses only Bachmann trains & tracks.  I run both DC and DCC using Bachmann's DC Controller & the EZ Command (DCC) system.  What else is needed to program CVs.  I know that the EZ Command does not support changing CVs, only the specific addresses.

[richg]

Obviously you need a better system.

You can change CV's  with the Bachmann Dynamis. There are other systems but I cannot mention them here.
You must be very new to DCC. There is a learning curve.

Below is a link from a Google search with many links about CV's. Probably much more than you really need. Pick an choose the ones you want to keep in Favorites. You will need them.

http://tinyurl.com/cfprgla

Rich