How to connect Bachmann DC controller/throttle to EZ Command

[BuzzHollow]

I have an EZ Command station with a network type plugin port. I believe you can connect a DC Bachmann speed control to that port and control the single DC engine on the track. Does anyone know where to get that connecting cable or what the Bachmann part number is? Thanks - Buzz

[Bucksco]

Call the Service department. They will be able to supply the connecting cord. You might want to check out the EZ command video for more info:
http://www.youtube.com/watch?v=JAin_nEMHlY&feature=relmfu

[Jim Banner]

Figure 17 on page 6 of your E-Z Command manual shows how to do this.  A black power cord with a miniature stereo plug on each end should have come with your E-Z Command.  One end of this cord plugs into the output (track) jack of a #44212 analog controller and the other end plugs into the power input jack of the E-Z Command. It does NOT plug into the I/O jack.  The wall plug power supply plugs into the #44212 controller.  The E-Z Command draws its power from that wall plug power supply via the black cord coming from the analogue controller.

Jim