Help withremote turnouts

[lposse1]

Hello Bach-man-

My family and I are new to the model railroading and just bought a track kit.  As I said I'm new and don't know how to hook up the remote turnouts.  The info was not included with the hook up directions.  Thanks !

[NarrowMinded]

Assuming you have a bachmann supply with the push in tabs,

attach the red wire by pushing in on the tabs and inserting one side of the fork connector in the hole or cut the fork connector off and insert the bare wires into the holes and release the tabs, plug the flat part of that wire into the side of the switch,

plug the green wire into the front of the switch.

slide the switch then press down on it to activate the switch, slide the switch the other direction and press down on it to activate it for the other direction.

if you want to change the relationship of the activation switch to the turnout/track just unplug the green flip it over and then reinsert.

Not it only takes a momentary push down on the switch to activate it, don't hold it down for a long time.


also the the switches plug into the side of each other.
NM-Jeff