DCC on Board locomotives functions

[petermac]

I have a pair of DCC on Board locomotives, a GP35 (60704) and a GP40 (60306).  On the UK Bachmann website there is a DCC OnBoard locomotive manual (http://www.bachmann.co.uk/pdfs/DCC_onboard_general.pdf) that lists  the following functions:

F0 Locomotive directional lighting
F1 180mA auxiliary output
F3 Shunting speed reduction selection
F4 Inertia on/off

Are these functions available on my locomotives? F3 and F4 dont appear to do anything.

F10 toggles directional lighting and F1 Toggles dimming (Using an E-Z Command controller).  Are there other functions available with these locos? Is there a document that describes the functions that are available?

Thanks
Peter

[cact25]

That is the worst decoder info sheet I have seen to date!

Jim