Bachmann DCC turnouts

[rtoisme]

I cannot get my Bachmann DCC Turnouts to work with my Digitraxx "Zepher"control box. Does Bach man know how these work together??

[the Bach-man]

Sorry, I don't have a Zephyr, so I have no idea.
I would think Digitraxx would...
the Bach-man

[jgaynor]

are you also pressing the program button on the turnout and the setting a new address
I'm in the process of building a new layout and I try to read up on all of my equipment before I buy. I have already got a couple of the turnouts and according to the direction you first need to install in on your layout and make sure power is running completely though the section. Then push the program button on the turnout then program the controller for the turn out

Hope this info help you out

[rtoisme]

Thanks for you help! I followed Hunt's instructions and they work fine. I hope you can see his answer so you can copy his instructions. In my case I had to use a 3 digit # to program in.

[rtoisme]

Thanks for your help Hunt!

[rtoisme]

I have a Bachmann Dynamis control center. I forgot how to program my engines with it. If somebody could post this info I would be very grateful@!

[ginzokid]

I can not seem to get the DCC turnouts to work with my NCE Pro system. Any suggestions Bachman or anyone else?