Williams Trainmaster

[MB425]

I know the catalog lists the Trainmasters as 0-31 curve engines however will they take 0-27 curves?

Thanks!

[DominicMazoch]

It is very long.  It is already pushing it at O-31.  Doubt O-27.

[MB425]

Thanks Dominic. Just thought I would ask and of course welcome more input...

[3rail]

Dear MB425,

For locomotives, the catalog states minimum curve size.  While some are based on clearances with switch track motor housings, most are the minimum that a loco will handle without derailing.  As Dominic stated, the FM is long (17") and will require O-31 and you need to make sure the curves are not kinked at all or you may have derailments.

For diesel locomotives a good rule of thumb 15" or less will navigate O-27 curves.

Regards,

3rail

[MB425]

Thanks 3rail. I appreciate the reply and help!

[DominicMazoch]

And the EF-4 is REALLY pushing it at o-31!

[GTBob]

MB425---

Recently bought a Williams PF-45 loco (17" long).  The are no problems w/ the loco handling my 027 90 degree curves.  There is some over hang---but, in my opinion, no big deal.  However, I don't think I would try running it thru my Lionel 027 switches.  Good luck

GTB

[MB425]

Thanks GTBob!