Body Screws

[DominicMazoch]

I had to change out a headlight on my SD90 MoPac Heritage.  I noticed something about the 4 body to frame screws.  WAY TOO TIGHT.  Actually, one of the tubes had a stress crack in it.  Once I took the frame back on, I ran the screws down, the backed off about 1/8 to 1/16 turn.  Body is secured but not over stressed.  Mr. B, you might want to check with the plat about that.

[stubbsO]

I've noticed this myself. What you might want to do is swap around the screws with different holes and that fixed the tightness for me that your experiencing. Good Luck

[DominicMazoch]

I have placed candle wax on the screw threads.  That helps!