2-8-0 Power Plug

[T34]

My 2-8-0 engines DCC 4 wire power plug to headlight and motor has a wire pulled out of it . how can I get it fixed.


                                          T34   

[Stephen D. Richards]

Contact service at Bachmann.  Had the same problem.  They will send you a new set of wiring/pickups.    Stephen

[T34]

Stephen,
   
               Ive all ready had that problem and ordered that part and fixed it. I'm talking about the 4 pin plug to motor and headlight on my DCC equipped spectrum B&O 2-8-0.

                                T34 

[rich1998]

Stephen,
   
               Ive all ready had that problem and ordered that part and fixed it. I'm talking about the 4 pin plug to motor and headlight on my DCC equipped spectrum B&O 2-8-0.

                                T34 

you can order that part also. get the two pin plug while you are at it. i have ordered both in the past. i asked on the bachmann website what i needed, they sent the two plugs with wires and just billed me. sent a check in afterwards. cost was under ten dollars.
lex

[ta152h0]

I did that to a 2-10-2 and iliked the machine somuch,I bought another one and reverse engineere the wires.But my eyes aren't that good anymore.  I kept a "diary "of allthe wires so I have a record next time something like that happens. I imagine BACHMANN would not change wire diagrams for different locomotives.