News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Track Crossing Angle?

Started by James8336, February 15, 2011, 02:28:05 PM

Previous topic - Next topic

James8336

I have a 4 x 8 with an oval track running the perimeter. I want a figure 8 in the center using 18 radius track. what angle cross do I need at the center? and can I in fact fit the figure 8 inside the current 4 x 8 oval?

jbsmith

90* angle.
If the two are going to be seprate loops, just be sure to fit a straight piece at the ends of the outer loop, so that the outer oval is now more of a rectangle.
OR use 22R curves for the outer loop.
Either way it should be a tight fit.

IF this is what you have in mind, or something like this one
http://www.trainsetsonly.com/page/TSO/PROD/150-HO10      you should be OK

IF this
http://www.trainsetsonly.com/page/TSO/PROD/150-HO11

you have a some wiring to do,,the above forms a reverse loop.

Joe Satnik

Dear James:

Quote from jward:

"60 degree crossing......42" x 84"....20(ea.18"R) curves, 4(ea.) 9" straights, 1(ea.) 60 degree crossing"

Trust me, 60 degrees makes the most usable/flexible Figure-8. 

It's the only crossing that puts the curve track joints on the compass points (N, E, S, W). 

Try it on CAD first.   

Download and use Anyrail.com layout CAD program.  Fun and easy to learn.  First 50 track pieces are free.

Hope this helps.

Sincerely,

Joe Satnik 
If your loco is too heavy to lift, you'd better be able to ride in, on or behind it.